HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

23 Remote Control Unit (RCU) Function
Add Path Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add Path,,Normal end,,,Seq.=xxxxx
+{S/N,LDKC,Path Gr. ID,Controller ID}={99999,0x00,Default,4}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add Path,,Normal end,,,Seq.=xxxxx
+{S/N,LDKC,SSID,Controller ID}={99999,0x00,0x0004,4}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
[RCU]
Remote Control Unit function
Add Path
Add Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 151 Detailed Info: Add Path Operation
DescriptionItem
Indicates a serial number of the device.S/N
The LDKC number of the paired LDKC.LDKC
The path group ID. When the path group ID is default setting, Default is output.Path Gr. ID
The controller ID.Controller ID
The SSID.SSID
The port number of MCU.MCU Port
XP24000/XP20000 Audit Log User and Reference Guide 175