HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

20 Performance Monitor Function
Monitoring Switch (S/W) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[Perf Mon],Monitoring S/W,Enable 60sec,,Normal end,,,Seq.=xxxxx
[Perf Mon]
Performance Monitor function
Monitoring S/W
Monitoring Options operation
Enable 60sec
Enable 60 sec is the selected parameter. The operation uses the following parameters, as shown in
the following table.
Table 142 Parameters: Monitoring Switch (SW) Operation
DescriptionParameter
Monitoring is enabled and the gathering interval is set as XX sec.Enable XXsec
Monitoring is disabled.Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Monitoring Switch (S/W) and CU Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Perf Mon], Monitoring S/W & CU, Enable 60sec ,Normal end,,,Seq.=xxxxx
[Perf Mon]
Performance Monitor function
Monitoring S/W & CU
Monitoring Options operation
Enable 60sec
XP24000/XP20000 Audit Log User and Reference Guide 167