HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Set Speed Mode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Speed Mode,,Normal end,,,Seq.=xxxxxx
+CHA=CHA-1EL
++{Port Block,Mode}=[{A,Standard},{B,High Speed/MIX}],Num. of Blocks=2
+Num. of CHAs=2
[LUNM]
LUN Manager function
Set Speed Mode
Set Speed Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 123 Detailed Info: Set Speed Mode Operation
DescriptionItem
The Channel Adapter (CHA) name (name of channel adapter).Channel Adapter
(CHA)
The port block. For an 8-port channel adapter, port block A and B are output.Port Block
The mode set to the port.Mode
Standard: Standard mode. High Speed/MIX: High speed mode/Mix mode.
The number of port blocks in the channel adapter.Num. of Blocks
The number of channel adapters that the mode is changed.Num. of Channel
Adapters (CHA)
Set TCP/IP Port Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set TCP/IP Port,,Normal end,,,Seq.=xxxxx
{Port,PortNumber}=[{1A,2054},{3A,2055},{1B,4010},{3B,4011}],Num. of Ports=4
[LUNM]
LUN Manager function
Set TCP/IP Port
Set TCP/IP Port operation
Normal end
The operation has ended normally.
LUN Manager (LUNM) Function148