HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
Not used. (fixed to 0)DH Group
The user name of the host group.UserName
The number of host groups where authentication parameter has been set.Num. of Grps
Set Fibre Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[LUNM],Set Fibre Address,,Normal end,,,Seq.=xxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num.of Ports=2
[LUNM]
LUN Manager function
Set Fibre Address
Set Fibre Address operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 115 Detailed Info: Set Fibre Address
DescriptionItem
The name of the port that the address has been changed.Port
The address of Fibre Channel port after change using a number from 1 to 126.Fibre Addr
See Table 116 for relation of number and Fibre Channel port address.
The number of ports where address has been changed.Num. of Ports
Table 116 Output Values to Detailed Info and Addresses of Fibre Channel Port
Add.
*
ValueAdd.
*
ValueAdd.
*
ValueAdd.
*
Value
3A (96)9772 (64)65B2 (32)33EF (0)1
39 (97)9871 (65)66B1 (33)34E8 (1)2
36 (98)996E (66)67AE (34)35E4 (2)3
35 (99)1006D (67)68AD (35)36E2 (3)4
34 (100)1016C (68)69AC (36)37E1 (4)5
LUN Manager (LUNM) Function142