HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

System Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],System Option,,Normal end,,,Seq.=xxxxx
+Spare Disk Recover=Full Speed
+Disk Copy Pace=Slower
+Copy Operation(Correction Copy)=OFF
+Copy Operation(Dynamic Sparing)=OFF
+Read Configuration Data Mode=OFF
+Power Lost Mode=Destage Mode
+Cache Segment Size(SideA,SideB)=64(64,64)
+Link Failure Threshold=10
+Power Supply Type=3-phase AC Box(40A)
+{DKU,AC-BOX}=[{DKU-R1,1-phase AC Box(50A)}],Num. of AC-BOXs=1
+{LDKC:CU:LDEV,Destage}=[{0x00:0x00:0x00,OFF}],Num. of LDEVs=1
+{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1
+{LPR,Command Control}=[{System,10}],Num. of LPRs=1
+{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1
+Debug Mode=Set
[Install]
Install function
System Option
System Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 82 Detailed Info: System Option Operation
DescriptionItem
Indicates the setting status of Spare Disk Recover.Spare Disk Recover
Interleave: Give priority to the access from the host while executing copy process, Full
speed: Give priority to the copy process.
Indicates the setting status of Disk Copy Pace.Disk Copy Pace
Slower: Low speed, Medium: Medium speed, Faster: High speed
Indicates the setting status of Copy Operation (Correction Copy).Copy Operation
ON: Execute Correction Copy, OFF: Do not execute Correction Copy(Correction Copy)
Indicates the setting status of Copy Operation (Dynamic Sparing).Copy Operation
ON: Execute Dynamic Sparing, OFF: Do not execute Dynamic Sparing(Dynamic Sparing)
The method to allocate the serial number reported by Read Configuration Data command.Read Configuration
Data Mode
ON: Method supporting 4096, OFF: Traditional compatible method
The operation when power supply is lost.Power Lost Mode
Memory Backup Mode: Set to Memory Backup Mode
Install Function114