HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The number of ports where the LUN security setting is changed.Num. of Ports
Set Speed Mode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Speed Mode,,Normal end,,,Seq.=xxxxx
+CHA=CHA-1E
++{Port Block,Mode}=[{A,High Speed},{B,High Speed}Num. of Blocks=2
+CHA=CHA-1H
++{Port Block,Mode}=[{A,Standard},{B,High Speed}],Num. of Blocks=2
+Num. of CHAs=2
[Install]
Install function
Set Speed Mode
Set Speed Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 79 Detailed Info: Set Speed Mode Operation
DescriptionItem
The Channel Adapter (CHA) name (name of channel adapter).Channel Adapter
(CHA)
The port block. Port blocks A and B are output.Port Block
The mode set to the port.Mode
Standard: Standard mode. High Speed/MIX: High speed mode/Mix mode.
The number of port blocks in the channel adapter.Num. of Blocks
The number of channel adapters that the mode is changed.Num. of Channel
Adapters (CHA)
Set Subsystem Time Operation
Example 1 (The case of TOD Change)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Subsystem Time,TOD Change,
Normal end,,,Seq.=xxxxx
+Time=YYYY/MM/DD HH:mm:SS
Install Function112