HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Detailed information displays for this operation, as shown in the following table.
Table 75 Detailed Info: Set Host Mode Operation
DescriptionItem
The name of the port where the host group is created.Port
The host group number.HostGrpID
The host mode set. See the HP StorageWorks XP24000/XP20000 LUN Manager User's
Guide for the meaning of the host mode number.
Mode
The host mode option set. Hexadecimal values are output. See Table 118 for the relation
of output values and host mode option.
Option[0:31]
Option[32:63]
Option[64:95]
The number of host groups that the host mode setting is changed.Num. of Host
Groups
Set IP Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set IP Address,SVP&DKC,Normal end,,,Seq.=xxxxx
+{IPAdd,Subnet,Use Duplex,SVP Kind,M-SVP IPAdd,M-SVP Sunbet,
S-SVP IPAdd,S-SVP Subnet}=
{(123.456.789.123),(255.255.255.255),Valid,Master SVP,(111.222.333.444),
(255.255.255.255),
(555.666.777.888),(255.255.255.255)}
[Install]
Install function
Set IP Address
Set IP Address operation
SVP&DKC
SVP&DKC is the selected parameter. This operation uses the following parameters, as shown in the
following table.
Table 76 Parameters: Set IP Address Operation
DescriptionParameter
Change of the IP address for SVPSVP
Change of the IP address for SVP and DKCSVP&DKC
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Install Function110