HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Detailed information displays for this operation, as shown in the following table.
Table 72 Detailed Info: Set Command Device Security (CommandDevSec) Operation
DescriptionItem
The LDKC, CU and LDEV numbers of the logical volume where the command device is
set.
LDKC:CU:LDEV
Indicates whether the command device security setting is enabled or disabled.CommandDev
Disable or Enable is output.
The number of logical volumes where the command device is set.Num. of LDEVs
Set Fibre Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Fibre Address,,Normal end,,,Seq.=xxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num. of Ports=2
[Install]
Install function
Set Fibre Address
Set Fibre Address operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 73 Detailed Info: Set Fibre Address Operation
DescriptionItem
The name of the port that the fibre address has been set.Port
The address of Fibre Channel port after change using a number from 1 to 126.Fibre Addr.
See Table 116 for relation of number and Fibre Channel port address.
The number of ports where address has been set.Num. of Ports
Set Fibre Topology Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set Fibre Topology,,Normal end,,,Seq.=xxxxx
+{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P},
{XX,Disable,P-to-P}],Num. of Ports=4
[Install]
Install Function108