HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Set Command Device (CommandDev) Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set CommandDev,,Normal end,,,Seq.=xxxxx

+{LDKC:CU:LDEV,CommandDev}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],

Num. of LDEVs=2

[Install]

Install function

Set CommandDev

Set CommandDev operation

Normal end

The operation has ended normally.

Seq.=xxxxxx

Sequence number of log information (0000000000 to 4294967295)

Detailed Information

Detailed information displays for this operation, as shown in the following table.

Table 71 Detailed Info: Set Command Device (CommandDev) Operation

DescriptionItem

The LDKC, CU and LDEV numbers of the logical volume where the command device is

set.

LDKC:CU:LDEV

Indicates whether the command device setting is enabled or disabled.CommandDev

Disable or Enable is output.

The number of logical volumes where the command device is set.Num. of LDEVs

Set Command Device Security (CommandDevSec) Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Set CommandDevSec,,Normal end,,,Seq.=xxxxx

+{LDKC:CU:LDEV,CommandDevSec}=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],