HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Detailed information displays for this operation, as shown in the following table.
Table 64 Detailed Info: New Installation Operation
DescriptionItem
The type of microprogram installed.Micro Program
The number of each type of installed microprogram.Num. of Kind
Cache Residency Manager (Open DCR) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Open DCR,,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=0x00:0x00:0x00
++{Define,Mode,Prestaging,Start LBA,End LBA}=[{Set,Bind,No,0,2015},
{Set,Priority,Yes,3636,4175},{Delete,-,-,3636,4175}],Num. of DCR Setting=3
[Install]
Install function
Open DCR
Open DCR operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 65 Detailed Info: Cache Residency Manager Open DCR Operation
DescriptionItem
The LDKC number, the CU number and the LDEV number of the logical volume (for an
open system) where Cache Residency is set.
LDKC:CU:LDEV
The setting status of Cache Residency.Define
Set: set, Delete: cancel
The setting mode of Cache Residency. Indicates a dash (-) when Define is Delete.Mode
Bind: Bind mode, Priority: Priority mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-)
when Define is Delete.
Prestaging
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
The starting LBA number of the data which Cache Residency was set or canceled.Start LBA
The ending LBA number of the data which Cache Residency was set or canceled.End LBA
Install Function102