HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 84 AddVolume(FIBRE) Operation (continued)
DescriptionItem
The inflow control set to the cache of the mapped external volume
Enable: Enabled, Disable: Disabled
Inflow
The result of the operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The port name of the external port of the local storage systemPort
The WWN of the Target port of the external storage systemWWN
The LUN of the external volumeLUN
The number of mapping path (Port-WWN-LUN) configuredNum. of Paths
The LDKC, CU, and LDEV numbers of the LDEVs in the mapped external volume. The
number on the left of the colon is an LDKC number, the number between the colons is a
CU number, and the number on the right of the colon is an LDEV number
LDKC:CU:LDEV
The capacity of LDEVs in the mapped external volumes indicated by blocksLDEVCapa(blocks)
The SSIDSSID
The number of LDEVs in the mapped external volumesNum. of LDEVs
The number of mapped external volumesNum. of Volumes
BlockPaths(FIBRE) Operation
This logged information indicates that the Disconnect-Paths operation was only requested, but not
finished .
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],BlockPaths(FIBRE),,Normal end,,,Seq.=xxxxx
+{Port,WWN,Result}=[{1A,50560E8000C3E211,Normal end},{1A,50560E8000C3E211,Normal end},
{2A,50560E8000C3E212,Normal end}],Num. of Paths=3
[Ext Stor]
HP XP External Storage Software function
BlockPaths(FIBRE)
BlockPaths(FIBRE) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 85 (page 97).
Table 85 BlockPaths(FIBRE) Operation
DescriptionItem
The port name of the external port of the local storage system.Port
The WWN of the Target port of the external storage system.WWN
BlockPaths(FIBRE) Operation 97