HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

19 XP External Storage Software Function
AddVolume(FIBRE) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],AddVolume(FIBRE),,),,Normal end,,,Seq.=xxxxx
+{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,Capa(blocks),ExGroup,PathGroup,CLPR,
Emulation,Cache,Inflow,Result}={HITACHI,9500V,28528,0001,
0000000000000000000000000000000000000000000000000000000000000000,DF600F,4294967296,
E1-1,1,0,OPEN-V,Enable,Disable,Normal end}
++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0001},{2A,50560E8000C3E212,0x0001},
{3A,50560E8000C3E213,0x0001},{4A,50560E8000C3E214,0x0001}],Num. of Paths=4
++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x00:0x00,96000},{0x00:0x00:0x01,96000,0x00D8}],
Num. of LDEVs=2
+{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,Capa(blocks),ExGroup,PathGroup,CLPR,
Emulation,Cache,Inflow,Result}={HITACHI,9500V,28528,0001,
0000000000000000000000000000000000000000000000000000000000000000,DF600F,4294967296,
E1-1,1,0,OPEN-V,Enable,Disable,Normal end}
++{Port,WWN,LUN}=[{1A,50560E8000C3E211,0x0002},{2A,50560E8000C3E212,0x0002}],
Num. of Paths=2,
++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID}=[{0x00:0x01:0x00,4294967296,0x00D8}],Num. of LDEVs=1
+Num. of Volumes=2
[Ext Stor]
HP XP External Storage Software function
AddVolume(FIBRE)
AddVolume(FIBRE) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 84 (page 96).
Table 84 AddVolume(FIBRE) Operation
DescriptionItem
The name of the vendor of the external storage system where the mapped external volume
exists
Vendor
The product name of the external storage system where the mapped external volume
exists
Product
The serial number the external storage system where the mapped external volume existsSerial
The identification character 1 of the mapped external volumeVolumeID1
The identification character 2 of the mapped external volumeVolumeID2
The device name that the mapped external volume notifies to the hostDevice
The capacity of the mapped external volume indicated by blocksCapa(blocks)
The number of the external volume group and the reference number assigned to the
external volume of the mapped external volume. The number on the left of a dash (-) is
the external volume number and the number on the right of the dash (-) is the reference
number of the group.
ExGroup
The path group number of the mapped external volumePathGroup
The CLPR number of the mapped external volumeCLPR
The emulation type of the mapped external volumeEmulation
The cache mode of the mapped external volume
Enable: Enabled, Disable: Disabled
Cache
96 XP External Storage Software Function