HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 67 Pair-Option Operation (continued)
DescriptionItem
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of changed pairs.Num. of Pairs
R-Cmd. Dev. Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[UR],R-Cmd.Dev.,Assign,Normal end,,,Seq.=xxxxx
+{LDKC,JNLG,MirrorID,Cmd.Dev.(LDKC:CU:LDEV),Result}=
[{0x00,0x01,0x01,0x00:0x12:0x34,Normal end},{0x00,0x10,0x02,0x00:0x56:0x78,Normal end}],
Num. of Mirrors=2
[Cnt Ac-J]
HP XP Continuous Access Journal Software function
R-Cmd.Dev.
R-Cmd.Dev. operation
Assign
Assign is selected as the parameter. The operation uses the following parameters as shown in
Table 68 (page 81).
Table 68 Parameters for R-Cmd.Dev. Operation
DescriptionItem
The remote command device is assigned.Assign
The remote command device is released.Release
Normal end
The operation has ended normally.
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed information
Detailed information displays for this operation, as shown in Table 69 (page 81).
Table 69 R-Cmd.Dev. Operation
DescriptionItem
The LDKC number that the journal group belongsLDKC
The journal group numberJNLG
The mirror IDMirrorID
The LDKC, CU , and LDEV numbers of the remote command
device
The hyphen (-) displays under the following conditions:
• When assigning a remote command device without
specifying a remote command device as a parameter
• When releasing a remote command device
Cmd.Dev.(LDKC:CU:LDEV)
R-Cmd. Dev. Operation 81