HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 54 (page 69).
Table 54 Function Switch Operation
DescriptionItem
Each bit position (on/off) of the function switch information assigned by 64 bits. The
beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is
off, and "1" indicates the bit is on.
In the example above, bit 3 and bit 5 are on and the other bits are off.
Switch
Paircreate Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Paircreate,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),S/N,LDKC,ID,ControllerID,Type,
Initial Copy,
Fence Level,Copy Pace,Priority,Diff,CTG, Error Level,Result}=
-{1A-0x00-0x000,GR-0xFE-0x3FF,99999,0x00,Default,4,Async,Entire,Never,15,032,
Auto,0x00,
Group,Normal End}, (snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Paircreate
Paircreate operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 55 (page 69).
Table 55 Paircreate Operation
DescriptionItem
The port number, host group number, and LUN of the volume specified to the primary
volume when the pair is created sequentially
P-VOL (Port-G-ID-LUN)
The port number, host group number, and LUN of the volume specified to the
secondary volume when the pair is created sequentially
S-VOL (Port-G-ID-LUN)
The serial number of the deviceS/N
The LDKC number of the paired LDKCLDKC
The path group ID or SSID
When the path group ID is default setting, the output is Default
ID
The controller IDController ID
The update copy mode set
Sync: Synchronous mode, Async: Asynchronous mode
Type
Paircreate Operation 69