HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 18 Set Syslog Server Operation
DescriptionItem
Indicates whether to output detailed information to the syslog server.
Enable: Output detailed information. Disable: Do not output detailed information.
DetailFlg
The location identification information for the storage system. Not output when setting is
not changed.
LocationInfo
The syslog server to which information is output. Not output when setting is not changed.
Primary: Primary syslog server. Secondary: Secondary syslog server.
ServerType
The version number of the internet protocol. If the setting is not changed, a hyphen (-) is
displayed.
IPv6: Internet Protocol Version 6. IPv4: Internet Protocol Version 4
IPAddrVer
Whether to transfer the syslog information to the syslog server.
Enable: Transfer syslog information. Disable: Do not transfer syslog information.
OutFlg
The IP address to which the syslog information is sent. If the setting is not changed, a
hyphen (-) is displayed.
SrvAddr
The port number of the LAN when sending the syslog information. If the setting is not
changed, a hyphen (-) is displayed.
SrvPortNum
SIM Complete Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[AuditLog], SIM Complete,,Normal end,,,
Seq.=xxxxx
+Reference Code=[0x7C0300],Num. of Reference Codes=1
[Audit Log]
Audit Log function
SIM Complete
SIM Complete operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
If enabled, detailed information appears for this operation, as shown in Table 19 (page 46).
Table 19 SIM Complete Operation
DescriptionItem
The SIM reference code of the error and service request.Reference Code
The number of SIM reference codes.Num. of Reference
Codes
46 Audit Log Function