HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 16 Set FTP Server Operation
DescriptionItem
The server type of the FTP (File Transfer Protocol) server to be set. If the setting is not
changed, a hyphen (-) is displayed.
Primary: Primary FTP server. Secondary: Secondary FTP server.
ServerType
The version number of the internet protocol. If the setting is not changed, a hyphen (-) is
displayed.
IPv6: Internet Protocol Version 6. IPv4: Internet Protocol Version 4
IPAddrVer
Whether to transfer the audit log information file (audit.log) to the FTP server.
Enable: Transfer audit log information file. Disable: Do not transfer audit log information
file.
OutFlg
The IP address to which the audit log information file is sent. If the setting is not changed,
a hyphen (-) is displayed.
SrvAddr
The user name to login to the FTP server. If the setting has not changed, a hyphen (-) is
displayed.
UserName
The directory in the FTP server that the transferred audit log information files are stored.
If the setting is not changed, a hyphen (-) is displayed.
OutputDir
Set Syslog Server Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Audit Log],Set Syslog Server,DetailFlg=Enable,Normal end,,,Seq.=xxxxx
+DetailFlg=Enable
+LocationInfo=USP001
+{ServerType,IPAddrVer,OutFlg,SrvAddr,SrvPortNum}=[{Primary,IPv4,Disable,
192.168.0.1,514},
-{Secondary,Enable,IPv6,3ffe:0501:4819:2000:5254:00ff:fedc:50d2,-}]
[Audit Log]
Audit Log function
Set Syslog Server
Set System Log Server operation
Detail Flag=Enable
Enable is the selected parameter. This operation uses the following parameters, as shown in
Table 17 (page 45).
Table 17 Parameters for Set Syslog Server Operation
DescriptionParameter
Detailed information is output to the syslog server.Detail Flag=Enable
Detailed information is not output to the syslog server.Detail Flag=Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
If enabled, detailed information appears for this operation, as shown in Table 18 (page 46).
Set Syslog Server Operation 45