HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Encryption (ENC) Function — PG Enc. Set Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ENC],PG Enc. Set,,Normal end,,,Seq.=xxxxx
+{PG,Encryption}=[{XX-XX,Enable},{XX-XX,Disable}],Num. of PGs=2
[ENC]
ENC function
PG Enc. Set
PG Encryption Set operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Log information serial number (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 313 (page 255).
Table 313 PG Enc. Set Operation
DescriptionItem
The parity group number.PG
The status of the encryption.
Enable: The encryption setting is enabled.
Disable: The encryption setting is disabled.
Encryption
The number of parity groups.Num. of PGs
Install Function — Set Encryption Key Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Encryption Key,,Normal end,,,
Seq.=xxxxx
[Install]
Install function
Set Encryption Key
Set Encryption Key operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Log information serial number (0000000000 to 4294967295)
PINDeletion Function — Delete Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [PINDeletion],Delete,
Normal end,,,Seq.=xxxxx+LDEV=[0x00:0x00:0x00, 0x00:0x00:0x01],Num. of LDEVs=2
[PINDeletion]
PINDeletion function
Delete
Delete operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Log information serial number (0000000000 to 4294967295)
Encryption (ENC) Function — PG Enc. Set Operation 255