HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 294 Set Class Threshold Operation
DescriptionItem
The class name of the HDD whose threshold is changed.
The class name is displayed in the alphabet from A to J.
ClassName
The threshold (the upper limit of the disk usage rate) after it changes.
The threshold is displayed by the number from 0 to 100. The unit is percent (%).
AvailabilityMax(%)
The number of HDD classes whose threshold is changed.Num. of Classes
Set Fixed PG Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN], Set Fixed PG,,Normal end,,,Seq.=xxxxx
+{Type, PG}=[{Release,1-1},{Release,1-2},{Release,1-3},{Release,1-4},{Release,1-6},
{Release,2-1},{Release,2-2},{Release,2-3}] Num. of PGs = 8
[Auto LUN]
HP XP Auto LUN Software function
Set Fixed PG
Set Fixed PG operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 295 (page 237).
Table 295 Set Fixed PG Operation
DescriptionItem
The executed operation to the parity group.
Set: Set to the fixed parity group, Release: Set to the normal parity group.
Type
ID of the parity group whose settings are changed.PG
The number of parity groups whose settings are changed.Num. of PGs
Set Migration Vol Operation
This logged information indicates that the migration was only requested, but not finished. For
information on using XP Auto LUN, see the HP StorageWorks XP24000/XP20000 Auto LUN
Software User Guide.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Set Migration Vol,,Normal end,,,Seq.=xxxxxx
+{Instruction,SourceLDEV,TargetLDEV,OwnerID,Result}=[{Create,0x00:0x00:0x00,0x00:
0x00:0x01,
0xFF,Normal end},{ Create,0x00:0x00:0x02,0x00:0x00:0x03,0xFF, Error(XXXX-YYYY) end },
{ Create,0x00:0x00:0x04,0x00:0x00:0x05,0xFF,Normal end},
{ Create,0x00:0x00:0x06,0x00:0x00:0x07,0xFF, Error(XXXX-YYYY) end }] Num. of LDEVs =4
[Auto LUN]
HP XP Auto LUN Software function
Set Migration Vol
Set Migration Vol operation
Normal end
The operation has ended normally.
Set Fixed PG Operation 237