HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 293 Set Auto Plan Param Operation (continued)
DescriptionItem
The specified sampling term.
One of these values is output:
• None
• Every day
• Once every X days (For the value of X, see PlanDay index below)
• Once a week
• Once a month
PlanType
The setting value for sampling term. The output value depends on the sampling term output
to PlanType.
• If None is output to PlanType, nothing is output to PlanDay.
• If Every day is output to PlanType, nothing is output to PlanDay.
• If Once every X days is output to PlanType, the sampling interval is indicated.
• If Once a week is output to PlanType, the specified day of the week is output to
PlanDay. SUN, MON, TUE, WED, THE, FRI, or SAT is output.
• If Once a month is output to PlanType, the specified day from 1 to 31 is output to
PlanDay
PlanDay
The target time zone for the sampling. The left side of the hyphen (-) indicates the start
time of sampling, and the right side indicates the end time.
MonitorPeriod
The target data for making plan (the range of the usage rate that is analyzed by the auto
migration function)
All: All sampling data
XX: The sampling data from the first to 96th.
SampleCount
The number of setting. 1 is always output.Num. of Data
Set Class Threshold Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN], Set Class Threshold,,Normal end,,,
Seq.=xxxxx
+{ClassName,AvailabilityMax(%)}=[{A,100},{B,100},{C,100},{D,100},{E,100},{F,100}]
Num. of Classes = 6
[Auto LUN]
HP XP Auto LUN Software function
Set Class Threshold
Set Class Threshold operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 294 (page 237).
236 XP Auto LUN Software Function