HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 292 Delete Auto Plan Operation
DescriptionItem
The executed operation.
Number: is output when a part of the auto migration plans is deleted. The number indicates
what number of lines from the top of the auto migration plan list and the subsequent lines
were deleted.
ALL: is output when all the auto migration plans are deleted.
PlanNo
The number of settings. 1 is always output.Num. of Plan
Del Migration Log Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Del Migration Log,,Normal end,,,Seq.=xxxxxx
[Auto LUN]
HP XP Auto LUN Software function
Del Migration Log
Del Migration Log operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Set Auto Plan Param Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN], Set Auto Plan Param,,Normal end,,,
Seq.=xxxxx
+{SetType,PlanSwitch,PlanType,PlanDay,MonitorPeriod,SampleCount}=[{Default,Enable,
Once a month,31,00:30-24:00,ALL}] Num. of Data = 1
[Auto LUN]
HP XP Auto LUN Software function
Set Auto Plan Param
Set Auto Plan Param operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 293 (page 235).
Table 293 Set Auto Plan Param Operation
DescriptionItem
The executed operation.
Default: The default auto migration plan is applied (click the Default button, and then
click the Set button).
Customize: The customized auto migration plan is applied (click the Set button after
changing the value of the auto migration plan parameter).
SetType
Indicates whether the auto migration plan settings are enabled or disabled.
Disable or Enable is output.
PlanSwitch
Del Migration Log Operation 235