HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 286 Make Volume Operation (continued)
DescriptionItem
The unit of the CV capacity. The unit varies according to the setting.
KB: For open-system volume
Cyl: For mainframe-system volume
LBA: When LBA is specified
Unit
Indicates system disk status
Enable: Enabled, Disable: Disabled
System Disk
The number of LDEVsNum. of LDEVs
Set SSID Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Set SSID,,Normal end,,,Seq.=xxxxxx
+{SSID,LDKC:CU:LDEV}=[{XXXXX,0xXX:0xXX:0xXX},{XXXXX,0xXX:0xXX:0xXX}],Num. of SSIDs=2
[VLL]
Virtual LVI / Virtual LUN function
Set SSID
Set SSID operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 287 (page 231).
Table 287 Set SSID Operation
DescriptionItem
The SSID number
The SSID specified when Volume Initialize or Make Volume is executed is also output.
SSID
The LDKC, CU, and LDEV numbersLDKC:CU:LDEV
The number of SSIDNum. of SSIDs
System Disk Options Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],System Disk Options,,Normal end,,,Seq.=xxxxx
+{Option,Set,Result}=[{Additional configuration Back up,Enable,Normal}],Num. of Modes=1
[VLL]
Virtual LVI / Virtual LUN function
System Disk Options
System Disk Options operation
Normal end
The operation has ended normally
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed Information
Set SSID Operation 231