HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 281 (page 227).
Table 281 Suspend-Pair Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is S-VOL.
P-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is P-VOL.
S-VOL(LDKC:CU:LDEV)
The mirror IDMirrorID
The serial number of the logical device (storage system)S/N
The controller ID
N/A is output when CTRLID is set by using a spreadsheet.
CTRLID
Indicates whether the split data volume is a primary or secondary data volume
P-VOL: Primary, S-VOL: Secondary
Type
Indicates whether writing to the secondary volume is enabled or not
Disable: Disabled, Enable: Enabled
S-VOL Write
The split range
Volume: Volume range, Group: Group range
Range
The suspend mode
Purge: Purge mode, Flush: Flush mode
Suspend Mode
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of pairsNum. of Pairs
System-Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UR],System-Option,Normal end,,,Seq.=xxxxx
+Max Initial Copy=64
+{LDKC:CU,Change SIM Report}=[{0x00:0x00,Report},{0x00:0x01,Not Report},{0x00:0x02,
Not Report},(snip)
- (snip), {0x01:0xFE,,Report}],Num of CUs=510
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
System-Option
System-Option operation
Normal end
The operation has ended normally.
System-Option Operation 227