HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

29 Performance Monitor Function

Monitoring S/W Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[Perf Mon],Monitoring S/W,Enable 60sec,,Normal end,,,Seq.=xxxxx

[Perf Mon]

Performance Monitor function

Monitoring S/W

Monitoring Options operation

Enable 60sec

Enable 60sec is the selected parameter. The operation uses the following parameters, as shown

in Table 227 (page 187).

Table 227 Parameters for Monitoring S/W Operation

DescriptionParameter

Monitoring is enabled and the gathering interval is set as XX sec.Enable XXsec

Monitoring is disabled.Disable

Normal end

The operation has ended normally.

Seq.=xxxxxx

Sequence number of log information (0000000000 to 4294967295).

Monitoring Switch (S/W) & CU Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Mon], Monitoring S/W & CU, Enable 60sec ,Normal end,,,

Seq.=xxxxx

[Perf Mon]

Performance Monitor function

Monitoring S/W & CU

Monitoring Options operation

Enable 60sec

Enable 60sec is selected as the parameter. The operation uses the following parameters, as shown

in Table 228 (page 187).

Table 228 Parameters for S/W & CU Operation