HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Set All Priority (Prio) Port Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00 [Perf Ctrl],Set All Prio Port,,Normal end,,,
Seq.=xxxxx
+{AllPriority,Treshold,Mode}={Enable,XXXXXXXX,IOPS}
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set All Prio Port
Set All Prio Port operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Detailed Information
Detailed information displays for this operation, as shown in Table 219 (page 181).
Table 219 Set All Prio Port Operation
DescriptionItem
The setting status of the All Thresholds value in the port tab.
Enable: All Thresholds value is set.
Disable: All Thresholds value is cancelled.
AllPriority
The All Thresholds value set.
This value is output only when the All Thresholds value is set.
Threshold
The rate type of the All Thresholds value.
IOPS: I/O rate, KB/s: Transfer rate.
This value is output only when the All Thresholds value is set.
Mode
Set All Priority (Prio) WWN Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set All Prio WWN,,Normal end,,,Seq.=xxxxx
+{AllPriority,Threshold,Mode}={Enable,XXXXXXXX,IOPS}
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set All Prio WWN
Set All Prio WWN operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Detailed Information
Detailed information displays for this operation, as shown in Table 220 (page 182).
Set All Priority (Prio) Port Operation 181