HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

28 XP Performance Control (Perf Ctrl) Function
Change XP Performance Control Group (PerfCtrlGrp) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PerfCtrl],Change PerfCtrlGrp,,Normal end,,,Seq.=xxxxx +{PPC Group,
Priority,UpperLimit,Mode}=[{XXXXXXXXXXXXXXXX,Non-Prio,XXXXXXXX,IOPS}],
Num. of PPC Groups=1
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Change PerfCtrlGrp
Change XP Performance Control Group (PerfCtrlGrp) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 216 (page 179).
Table 216 Change PerfCtrlGrp Operation
DescriptionItem
The Perf Ctrl group name.PPC Group
The attribute of the host bus adapter in the Perf Ctrl group after change.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN.
Priority
The upper limit value when the attribute is set to Non-Prio.
When the attribute is set to Prio, this value is not output.
Upper Limit
The type of rate used for upper limit control.
IOPS: I/O rate, KB/s: Transfer rate.
When the attribute is set to Prio, this value is not output.
Mode
The number of Perf Ctrl groups that the setting was changed.Num. of PPC
Groups
Clear PPC Info Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Clear PPC Info,,Normal end,,,Seq.=xxxxx
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Clear PPC Info
Clear PPC Info operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Default Set Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Default Set,Kind=WWN,Normal end,,,
Seq.=xxxxx
Change XP Performance Control Group (PerfCtrlGrp) Operation 179