HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Correction Copy operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 200 (page 169).
Table 200 Correction Copy Operation
DescriptionItem
The mounting location of the PDEV (physical device).PDEV
Drive Interrupt Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Drive Interrupt,,Normal end,,,Seq.=xxxxx
+PDEV=HDD00-01
[Maintenance]
Maintenance function
Drive Interrupt
Drive Interrupt operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 201 (page 169).
Table 201 Drive Interrupt Operation
DescriptionItem
The mounting location of the PDEV (physical device).PDEV
Format Operation
The logged information indicates that the Format operation was only requested, but not finished.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Format,,Normal end,,,Seq.=xxxxx
+PG=[1-1],Num. of PGs=1
+PG=[E1-1],Num. of PGs=1 (for an external volume)
+PG=[V1-1],Num. of PGs=1 (for a virtual volume)
+PG=[X1-1],Num. of PGs=1 (for a Dynamic Provisioning volume)
+LDEV=[0x00:0x03:0x2f],Num. of LDEVs=1
[Maintenance]
Maintenance function
Format
Format operation
Progress Error
Progress Error is the parameter output when a failure is detected while displaying the progress of
the Format process.
Normal end
The operation has ended normally.
Drive Interrupt Operation 169