HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Set Fibre-Channel Security Protocol (FCSP) Target Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set FCSP Target,,Normal end,,,Seq.=xxxxx
+{Port,HostGrpID,Switch,DH Group,UserName}=[{1E,0x01,Enable,0,1111111111111111},
{3E,0x01,Disable,0,2222222222222222}],Num. of Grps=2
[LUNM]
LUN Manager function
Set FCSP Target
Set FCSP Target operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 186 (page 160).
Table 186 Set FCSP Target Operation
DescriptionItem
The name of the port which includes the host group where authentication parameter has
been set.
Port
The number of the host group where authentication has been set.HostGrpID
The setting status whether to execute authentication by host group.
Disable: Do not authenticate, Enable: Authenticate
Switch
Not used. (fixed to 0)DH Group
The user name of the host group.UserName
The number of host groups where authentication parameter has been set.Num. of Grps
Set Fibre Address Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Fibre Address,,Normal end,,,Seq.=xxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num.of Ports=2
[LUNM]
LUN Manager function
Set Fibre Address
Set Fibre Address operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 187 (page 161).
160 LUNM Function