HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

5. Select one of the following:
• If using a primary syslog server:
◦ Select Enable in Output to Primary Server.
– Enter the IP Address in Primary Server Setting. Do not enter the periods.
– Enter the Port Number in Primary Server Setting. You can enter a number from
1 to 65,535.
• If using a secondary syslog server:
◦ Select Enable in Output to Secondary Server.
– Enter the IP Address in Secondary Server Setting. Do not enter the periods.
– Enter the Port Number in Secondary Server Setting. You can enter a number
from 1 to 65,535.
6. Enter the name of the storage system from which you are transferring the audit log file in
Location Identification Name. The name can contain up to 32 one-byte characters, including:
• Letters (A-Z and a-z)
• Numbers (0-9)
• Symbols (including ! " # $ % & ' ( ) = - ~ ^ | \ { } [ ] @ ` : ; * + _ ? / < > .)
• You cannot use a comma (,) or a space.
7. Click Enable for Output Detailed Information.
8. Click Apply. A confirmation message is displayed.
9. Click OK.
16 Introduction