HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 180 Set Channel Speed Operation
DescriptionItem
The name of the port that the host speed (data transfer speed) is set.Port
The host speed set. The unit is Gbps (Gigabits per second). When Auto is set for the host
speed, Auto is output.
Speed(Gbps)
The number of ports where the host speed is set.Num. of Ports
Set Command Device (CommandDev) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDev,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUNM]
LUN Manager function
Set CommandDev
Set CommandDev operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 181 (page 157).
Table 181 Set CommandDev Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device
setting is changed
LDKC:CU:LDEV
Indicates whether the command device setting is enabled or disabled
Disable or Enable will appear
CommandDev
The number of logical volumes where the command device setting is changedNum. of LDEVs
Set Command Device Security (CommandDev Sec) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDevSec,,Normal end,,,Seq.=xxxxx
+{LDKC:CU:LDEV,CommandDevSec}=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num.of LDEVs=2
[LUNM]
LUN Manager function
Set CommandDevSec
Set CommandDevSec operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 182 (page 158).
Set Command Device (CommandDev) Operation 157