HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 154 Parameters for Set Subsystem Time Operation
DescriptionParameter
The date and the time.TOD Change
The setting of time correction function.Synchro. Infor.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 155 (page 140).
Table 155 Set Subsystem Time Operation
DescriptionItem
Indicates the date and the time in the format of YYYY/MM/DD HH:mm:SS .(YYYY: year,
MM: month, DD: date, HH: hour, mm: minute, SS. second).
Time
Indicates whether the time correction function is valid or invalid.
Valid: Enable, Invalid: Disable
Use Synchro.
The IP address (IPv4 or IPv6) of SNTP server.SNTP IP
The port used by SNTP server.SNTP Port
The time zone.Time Zone
The time when the time correction function is executed. Only HH (Hour: 00 to 23) is
indicated for the execution time.
Check Time
System Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],System Option,,Normal end,,,Seq.=xxxxx
+Spare Disk Recover=Full Speed
+Disk Copy Pace=Slower
+Copy Operation(Correction Copy)=OFF
+Copy Operation(Dynamic Sparing)=OFF
+Read Configuration Data Mode=OFF
+Power Lost Mode=Destage Mode
+Cache Segment Size(SideA,SideB)=64(64,64)
+Link Failure Threshold=10
+Power Supply Type=3-phase AC Box(40A)
+{DKU,AC-BOX}=[{DKU-R1,1-phase AC Box(50A)}],Num. of AC-BOXs=1
+{LDKC:CU:LDEV,Destage}=[{0x00:0x00:0x00,OFF}],Num. of LDEVs=1
+{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1
+{LPR,Command Control}=[{System,10}],Num. of LPRs=1
+{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1
+Debug Mode=Set
[Install]
Install function
System Option
System Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 156 (page 141).
140 Install Function