HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 151 Set IP Address Operation
DescriptionItem
The IP address in SVP.IP Add
The subnet mask in SVP.Subnet
Indicates whether the Duplex setting in SVP is valid or invalid.
Valid: Valid, Invalid: Invalid
Use Duplex
The kind of duplicated SVP.
Master SVP: Master SVP, Standby SVP: Standby SVP.
SVP Kind
The status of IPv4.
Valid: enabled, Invalid: disabled.
IPv4
The subnet mask of IPv6.
Valid: enabled, Invalid: disabled.
IPv6
Master SVP details are provided in the format described below.
IPv4 (IP Address: IP address, Subnet Mask: Subnet Mask)
IPv6 (IP Address: IP Address, Subnet Prefix: Subnet Prefix)
M-SVP
IPv4 (IP Address,
Subnet Mask)
IPv6 (IP Address,
Subnet Prefix)
Standby SVP details are provided in the format described below.
IPv4 (IP Address: IP address, Subnet Mask: Subnet Mask)
IPv6 (IP Address: IP Address, Subnet Prefix: Subnet Prefix)
S-SVP
IPv4 (IP Address,
Subnet Mask)
IPv6 (IP Address,
Subnet Prefix)
Set Security Switch Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Security Switch,,Normal end,,,Seq.=xxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
[Install]
Install function
Set Security Switch
Set Security Switch operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 152 (page 138).
Table 152 Set Security Switch Operation
DescriptionItem
The name of the port where the LUN security setting is changed.Port
Indicates whether the LUN security setting is enabled or disabled.
Disable or Enable will appear.
Switch
The number of ports where the LUN security setting is changed.Num. of Ports
138 Install Function