HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 137 M/F DCR Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where
Cache Residency is set
LDKC:CU:LDEV
The setting status of Cache Residency
Set: set, Delete: cancel
Define
The setting mode of Cache Residency - Indicates a dash (-) when Define is Delete
Bind: Bind mode, Priority: Priority mode
Mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-)
when Define is Delete.
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
Prestaging
The starting cylinder number (CC) and the starting head number (HH) which the Cache
Residency is set or canceled
Start CC-HH
The ending cylinder number (CC) and the ending head number (HH) which the Cache
Residency is set or canceled
End CC-HH
The number of Cache Residency which has been set or canceledNum of DCR
Settings
New Installation Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],New Installation,,Normal end,,,Seq.=xxxxx
+Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG},
Num. of Kind=7
[Install]
Install function
New Installation
New Installation operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 138 (page 130).
Table 138 New Installation Operation
DescriptionItem
The type of microcode installed.Micro Program
The number of each type of installed microcode.Num. of Kind
Open DCR (Cache Residency Manager) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Open DCR,,Normal end,,,Seq.=xxxxx
+LDKC:CU:LDEV=0x00:0x00:0x00
++{Define,Mode,Prestaging,Start LBA,End LBA}=[{Set,Bind,No,0,2015},
{Set,Priority,Yes,3636,4175},{Delete,-,-,3636,4175}],Num. of DCR Setting=3
[Install]
Install function
Open DCR
130 Install Function