HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Table 134 Make Vol./Vol. Init
DescriptionItem
The parity group numberPG
The LDKC, CU, and LDEV numbersLDKC:CU:LDEV
The emulation typeEmulation
The capacity of CVSize
The unit of the capacity of CVUnit
The setting status of system disk
Disable or Enable will appear.
System Disk
The subsystem IDSSID
The number of LDEVsNum. of LDEVs
Micro Program Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],Micro Program,,Normal end,,,Seq.=xxxxx
+Micro Media=Floppy Disk
+Exchange How=Online
+Open Port Mode=Stop SCSI
+Reboot Grp.=By 1/2
+{Micro Kind, Old Ver, New Ver}=[{DKCMAIN, 5007000000, 5007000001},
{SVP, 50070000, 50070001},(snip)],Num.of Kind=10
[Install]
Install function
Micro Program
Micro Program operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 135 (page 128).
Table 135 Micro Program Operation
DescriptionItem
The media which the microcode to be exchanged is stored (Floppy disk, CD-ROM, SVP
HDD, HDD Backup or remote transfer).
Micro Media
The method to exchange the microcode.
Online: Exchanging the microcode online, Offline: Exchanging the microcode offline.
Exchange How
The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip SCSI
Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not output
when the PCB of the open system is not installed, or MP reboot is not executed.
Open Port Mode
The reboot group (By1/2, By1/4, or By One). However, it is not output when microcode
is changed offline, or MP reboot is not executed.
Reboot Grp.
The kind of microcode.Micro Kind
The old version number of the microcode.Old Ver
128 Install Function