HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

Install function
Install
Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 128 (page 125).
Table 128 Install Operation (Installing Additional Battery)
DescriptionItem
The operation when power supply is lost.
Memory Backup Mode: Set to Memory Backup Mode
Destage Mode: Set to Destage Mode
Power Lost Mode
The mounting location of the batteryBattery
The number of batteries.Num. of Batteries
Install CV Operation
This logged information indicates that the formatting was only requested, but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install CV,,Normal end,,,Seq.=xxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID}=[{1-1-(1),
0x00:0x00:0x00,
-,OPEN-V,10000,LBA,Disable,0x0005}],Num. of LDEVs=1
[Install]
Install function
Install CV
Install CV operation
No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table 129 (page 125).
Table 129 Parameters for Install CV Operation
DescriptionParameter
Formatted Install CV.No parameter
Unformatted Install CV.Non Format
The progress window of LDEV format is closed.Progress Close
Quick Format is selectedQuick Format
The progress window of preparing for Quick Format is closed.Quick Format Close
NOTE: No parameters are selected for any case other than those described in this table.
Normal end
The operation has ended normally.
Install CV Operation 125