HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx
+{DKA,Kind,Transfer Rate}=[{DKA-1AL,DKF 4MP,4},{DKA-1BL,DKF 4MP,4},{DKA-2ML,DKF 4MP,4},
{DKA-2NL,DKF 4MP,4}],Num. of DKAs=4
+{DKU,AC-BOX}=[{DKU-R1,3-phase AC Box(30A)}],Num. of DKUs=1
+FSW=[FSWR10-L,FSWR10-U,FSWR11-L,FSWR11-U,FSWR12-L,FSWR12-U,FSWR13-L,FSWR13-U,FSWR18-L,
FSWR18-U,FSWR19-L,FSWR19-U,FSWR1A-L,FSWR1A-U,FSWR1B-L,FSWR1B-U],Num. of FSWs=16
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-1,RAID1 (2D+2D),
DKR2F-J300FC,OPEN-V,3-3,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x00,OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-2,RAID5 (3D+1P),
DKR2F-J300FC,OPEN-V,-,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x10,OPEN-V,1688650752,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-3,RAID1 (2D+2D),
DKR2F-J300FC,OPEN-V,3-1,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x01,OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+Num. of PGs=3
+{B4,SPARE,Drive Type}=[{3,1,DKR2F-J300FC}],Num. of SPAREs=1
This logged information indicates that the formatting was only requested, but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
[Install]
Install function
Install
Install operation
No parameter
No parameter is selected in the example above. This operation uses the following parameters, as
shown in Table 123 (page 121).
Table 123 Parameters for Install Operation (Installing Additional Channel Adapters)
DescriptionParameter
The progress window of LDEV format when LDEV is added
is closed.
Progress Close
Quick Format was selected when LDEV is added.Quick Format
The progress window of preparing for Quick Format is
closed.
Quick Format Close
NOTE: No parameters are selected for any case other than those described in this table.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 124 (page 121).
Table 124 Install Operation (Installing Additional Subsystems, ECC Groups or LDEVs)
DescriptionItem
The Disk Adapter (DKA) mounting locationDisk Adapter (DKA)
The type of Disk Adapter (DKA)Kind
The transfer rate of Disk Adapters (DKA)Transfer Rate
The number of Disk Adapters (DKA)Num. of Disk
Adapters (DKA)
The mounting location of Disk Unit (DKU)Disk Unit (DKU)
Install Operation 121