HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (AE131-96085, May 2011)

HP XP External Storage Software function
Inflow-Control
Inflow-Control operation
Enable
Enable is selected as the parameter. The operation uses the parameters shown in Table 94 (page
103).
Table 94 Parameters for Inflow-Control Operation
DescriptionParameter
The cache memory is used.Enable
The cache memory is not used.Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 95 (page 103).
Table 95 Inflow-Control Operation
DescriptionItem
External volume group number for the executed setting operation.Group
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of external volume groups configured.Num. of Groups
UnitePathGroup Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UVM],UnitePathGroup,,Normal end,,,Seq=xxxxx
+{PathGroup,TargetPathGroup,Result}=[{1,2,Normal end},{1,3,Normal end},{11,12,Normal end}],
Num. of PathGroups=3
[Ext Stor]
HP XP External Storage Software function
UnitePathGroup
UnitePathGroup operation
Normal end
The operation has ended normally
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 96 (page 104).
UnitePathGroup Operation 103