HP StorageWorks XP24000 for FlashCopy Mirroring Software User's Guide (T5240-96001, June 2007)

ANTF0090IF CQU
ERY
Formatted
DEVN SSID LSS CC
A
CU SERIAL ACT MAX XC PC CC RV SEQNUM
4202 0102 02 02 2105 000000045029 1 1000 N N N N 00000000
Figure 64 Examp
le of th e FCQUE RY C om mand Execution Result
Table 41 Inform
ation Dis played by t he FCQUERY C ommand (Version 2)
Displayed
item
Displayed
content
Definition
DEVN
Device number recognized by the host
SSID
Subsystem number
LS S
CU number
CCA
Device number
CU
DKC emulation type
SERIAL
Serial numbe
r
ACT
Number of active Version 2 relationships. See Figure 65 on page 98.
MAX
Maximum number of pairs that can be created with the device specified by DEVN.
XC
S
Volume speci
fied by DEVN is in one of the following statuses:
•
S-VOL of the
Compatible XRC pair
•
At-Time Spl
it
volume for ShadowImage for Mainframe (online)*
•
M-VOL of th
e
TrueCopy Asynchronous for Mainframe pair (Timer Type is
SYSTEM or N
ONE, and the pair status is Duplex or Pend ing Duplex)
•
P-VOL of th
e
Universal Replicator for Mainframe pair (Timer Type is
SYSTEM or
NONE, and the pair status is Duplex or Pending Duplex)
N
Volume specified by DEVN is not in the status described above or the
volume is not used.
P
Volume specified by DEVN is currently used as the S-VOL (M-VOL) of the
ShadowImage for Mainframe or TrueCopy for Mainframe pair.
PC
S
Volume sp
ecified by DEVN is currently used as the T-VOL (R-VOL) of the
ShadowIm
age
for Mainframe or TrueCopy for Main frame pair.
N
Volume specified by DEVN is currently not used for ShadowImage for
Mainframe or TrueCopy for Mainframe.
CC
S
Volume specified by D EVN is currently used as the S-VOL of the Concurrent
Copy pair.
N
Volume specified by D EVN is currently used as the T-VOL of the Concurrent
Copy pair or is not used for Concurrent Copy.
RV
Displays whether the volume specified by DEVN is Revertible or not. However, since
Version 2 does not support this function, N will always be displayed for this item. For
details about Revertible,see the IBM manual.
SEQNUM
Displays the Sequence Number. However, since Version 2 does not support this function,
00000000 will always be displayed for this item. For details about Sequence Number,
see the IBM manual.
*Ifthe volume is setonlineinmorethanone LPAR defined by the mainframe system host.
XP24000 for FlashCopy Mirroring Software User's Guide
97