HP StorageWorks XP24000 for FlashCopy Mirroring Software User's Guide (T5240-96001, June 2007)

Figure 33 FCv2 Window

The items displayed in the FCv2 window are as follows:

• Tree

When you click Subsystem, the LDKC in the subsystem will be displayed. If you click an LDKC in

the

tree, the information for the CUs in that LDKC will be listed in the CU List on the right.

• CU List

• CU displays the CU number (00-FE) .

• SCP Time(sec.) displays the state-change-pending time that is set to the CUs, in seconds. N ote

that the

state-change-pending time displayed here is the same as the sate-change-pending

time fo

TrueCopy for Mainframe. For details, see the Hitachi TrueCopy for z/OS User and

Reference Guide.

• Preview displays the number of CUs where the changes of the state-change-pending time are not

appli

ed to the storage system yet.

• Pop-up menu

To change the state-change-pending time, select the desired command from the pop -up m enu.

The po

p-up menu will be displayed by right-clicking a CU displayed in CU.

• Compatible FlashCopy Information.: Displays the Compatible FlashCopy Information dialog

box (Figure 66 on pag e 99) and allows you to see the information for the Version 2

relationships in the selected CU.

•

SCP Time Setting:Displays the SCP Time Setting dialog box (Figure 44 on page 83).

• Cancel: If changes to the state-change-pending time of the selected CU are not applied to

the

storage system yet, this comm and changes the setting of the state-change-pending to

the

pre vious status.

• The Apply button applies the settings displayed in the FCv2 window to the subsystem.

• The Cancel button cancels settings d isplayed in the FC v2 window without applying them to

the

subsystem.

XP24000 for FlashCopy Mirroring Software User's Guide