HP StorageWorks XP24000 for FlashCopy Mirroring Software User's Guide (T5240-96001, June 2007)

• TheVolumeList, locatedinthe upperright on thePairOperation window,displaysthe following
information:
• Message
A
message will be displayed when there is no volume or pair to be displayed. If you see
a
message in the Volume List, click a different icon in the Tree on the left side of the Pair
Operation window.
• S-VOL
The information for the S-VOL is displayed in XX:YY:ZZ (LDKC number:CU number:LDEV
ID)
format.
Note: An LDEV number that ends with a # mark indicates that the LDEV is an external volume
(for example, 00:00:01#). For details regarding external volumes, see the HP StorageWorks
XP24000 External Stora ge Software User’s Guide.
• Status
The status of the Version 1 relationships and ShadowImage for Mainframe pairs. For detailed
information on the ShadowImage for Mainframe pair status, see the Hitachi ShadowImage for
z/OS User's Guide.
• T-VOL
The information for the T-VOL is displayed in XX:YY:ZZ (LDKC number:CU number:LDEV ID)
format. If there is no T-VOL, --- is displayed.
Note: An LDEV number that ends with a # mark indicates that the LDEV is an external volume
(for example, 00:00:01#). For details regarding external volumes, see the HP StorageWorks
XP24000 External Stora ge Software User’s Guide.
• Copy Pace
The copy pace of the ShadowImage for Mainframe pair is displayed.
• Sync.
The information displayed in this column varies according to the pair status. For details,
see
Table 11 on page 28.
• Emulation
The emulation t ype of the paired volume is displayed. For information about the emulation
type, see Table 27 on page 55.
• Capacity(Cyl)
The number of cylinders assigned to the volume is displayed.
• CTG
The registere d ID of the consistency group is displayed. If there is no consistency group,
--- is displayed.
• CLPR(S)
The cache logical par tition of the S-VOL is displayed.
• CLPR(T)
The cache logical partition of the T-VOL is displayed.
• Relationship(S)
The current state of the volume in terms of whether the Version 2 relationship is established or
not. When no relationship is established, --- is displayed. When a relationship is established,
the
status of the volume is displayed as shown in Table 31 on page 68. The parameter
displayed in Relationship(S) changes a c cording to whether the volume is an S-VOL or a
T-VOL, or whether the settings are normal.
Table 31 Parameters Displayed in Relationship(S)
Volume
Parameter
Settings a re Normal Settings are Abnormal
S-VOL
S- Normal S- Failed
T-VOL
T- Normal T- Failed
Volume set for both S-VOL and T-VOL
ST- Normal ST- Failed
68
Using
the Version 2 GUI