HP StorageWorks XP24000 for FlashCopy Mirroring Software User's Guide (T5240-96001, June 2007)

4Using theVersion 1GUI
This chapter describes the items displayed in the windows used by Version 1.
Pair Operation Window
The Pair Operation window (see Figure 5 on page27) displays thevolumeand pair informationfor the
selected CU image on the connected subsystem.
Figure 5 Pair Operation Window
Note: Though the Pair Operation window displays relationship information for Version 1 / Version
2
and pair information for ShadowImage for M ainframe, this section only explains the items
related to Version 1 relationships. For details about the items related to Version 2 relationships,
see “Pair Operation Window” on pa ge 67. For details about the items related to ShadowImage for
Mainframe pairs, see the Hitachi ShadowImage for z/OS User's Guide.
The Pair Operation window (Pair Operation tab) has the following features:
• The Tree, located on the left side of the Pair Operation window, allows you to select a defined CU
image or LDEV ID. By selecting a CU image or LDEV ID, the corresponding volume or relationship
will be displayed in the Volume List in the upper right on the Pair O peration window. Note that no
volume will be displayed when you select Subsystem at the top of the Tree.
• The Volume List, located in the upper right on the Pair O peration window, displays the following
information:
• Message
XP24000 for FlashCopy Mirroring Software User's Guide
27