HP StorageWorks XP24000 Continuous Access Software User and Reference Guide, v01 (T5278-96002, June 2007)

Path Status
Description Corrective Ac tion
The MCU port does not work. Repair the port status on the MCU.
The RCU port do
es not
work.
Repair the port status on the RCU. And
then delete the path with Edit Path or
Delete RCU, and add the path again with
Edit Path or Add RCU.
Logical
Blockade
The path relay equipment does not work.
Repair the path relay equipment. And
then delete the path with Edit Path or
Delete RCU, and add the path again with
Edit Path or Add RCU.
Theconnectioncableis physically broken.
Replace the broken cable. And then
delete the path with Edit Path or Delete
RCU, and add the path again with Edit
Path or Add RCU.
Program E
rror
Aprogram
error i s detected.
Delete the
path with Edit Path or Delete
RCU, and a
dd
the path again with Edit
Path or Ad
dRCU.
<blank> This path was not established.
Delete the failed path. You may need
to
change the minimum paths setting or
delete the RCU in order to delete the path.
Then add the path/RCU using Edit Path
or
Add RCU.
XP24000ContinuousAccessSoftwareUserand ReferenceGuide
139