HP StorageWorks XP24000 Continuous Access Journal Software User and Reference Guide, v01 (T5278-96001, June 2007)
Note
: The controller ID for a storage system is 5. The model name of the storage system is
HP
XP24000 Disk Array.
• S/N displays the five-digit serial num b er and the LDKC number of the remote storage system.
00 is displayed as the LDKC num b er when the remote storage system is an HP XP12000
Disk
Array.
• Path Gr. ID displays the path group ID. All the path group IDs are displayed as Default.
Note
: In the current version, the path group ID is set to the default value.
• M-R Path indicates the channel type of the logical paths between the local storage system and
the
remote storage system. This column always displays Fibre.
• Status indicates whether log ical p aths fail.
Normal
No
failure occurs on the logical paths.
Failed All the logical paths fail.
Warning
Some of the logical paths fail.
• Num of Path indicates the number of logical paths.
Displaying Information about Logical Paths
Logical pat
hs
are communications paths that connect the l oc al storage system ports and the remote
storage system ports.
To display information about logical paths in the DKC Op eration window:
1. In the Display box, select DKC.
2. Select a re
mote storage system from the tree.
The list displays logical paths. Each row in the list indicates one logical path
(Figure 43 on page 88).
Figure 43 Logical Path Informa tion in t he DKC Operation Window
The list displays the following:
• Path Gr. ID: Displays the path group ID.
The icon indicates the status of the path:
The logical path is in normal status.
A failure occurred at the log ical path.
• M-R Path: Indicates the channel t ype of the logical paths b etween the local storage system and
the
remote storage system. This column always displays Fibre.
• Status: indicates whether the logical path is in normal status.
Normal The logical path is in normal status. No failure occurs at the logical path.
Failed
A
failure occurs at the logical path.
• Port: Indicates a port number of the local storage system.
• Pair-Port: Indicates a port number of the remote storage system.
88
Using
the Continuous Access Journal GUI