HP StorageWorks XP12000/XP10000/SVS 200 SNMP Agent Reference Guide (AE002-96035, October 2007)

Table9FailureReportTrap
Name
Object Identifier
Type
Description
EventTrapSerialNumber
1. 3. 6 .1. 4 .1.116 . 5.11. 4 . 2.1 I N T E G E R
The product number of the
device that experienced the
failure.
EventTrapNickname
1. 3. 6 .1. 4 .1.116 . 5.11. 4 . 2. 2
DisplayString The device nickname.
EventTrapREFCODE
1. 3. 6 .1. 4 .1.116 . 5.11. 4 . 2.3
DisplayString
The failure reference (see
Table 8 on page 25).
EventTrapPartsID
1. 3. 6 .1. 4 .1.116 . 5.11. 4 . 2. 4
OBJECT
IDENTIFIER
The area where the failure
occurred (
Note ).
EventListDate
1. 3. 6 .1. 4 .1.116 . 5.11. 4 . 2.5
DisplayString Failure occurrence date.
EventListTime
1. 3. 6 .1. 4 .1.116 . 5.11. 4 . 2. 6
DisplayString Failure occurrence time.
Note: For example, the object identifier for a failure in a disk controller processor would be
1. 3. 6 .1. 4 .1.116 . 5.11. 4 .1.1. 6 .1. 2.
Standard MIB Specifications
Supported MIB
Table 10 on page 26 shows the supported MIBs. If you send a GET request for an object (MIB) that is
not supported, you will receive NoSuchName as a GET RESPONSE.
Table 10 Supported MIBs
MIB
Supported?
system group
Supported
interface group
Not supported
at group
Not supported
ip group
Not supported
icmp group
Not supported
tcp group
Not supported
udp group Not supported
egp group
Not supported
Standard MIB: MIB-II
snmp group
Not supported
Extension MIB
Supported
MIB Access Mode
The access mode for MIB in all communities is read only. If you send a GET request for a SET operation,
you will receive NoSuchName as a GET RESPONSE.
Object Identifier System
An object system supported by SNMP agent is as follows:
26
SNMP Supported MIB