HP StorageWorks XP12000/XP10000/SVS 200 SNMP Agent Reference Guide (AE002-96035, October 2007)

Figure 8 Add Community dialog box
Deleting a Community Name
To delete a community name:
1. Change to Modify mode.
2. Log on to open Remote Web Console Main window, click Go – Environmental Settings – SNMP
Information in the menu bar of Remote Web Console Main window. The SNMP Information
window is displayed (see Figure 4 on page 15).
3. In Community & Trap, select and then right-click the unwanted community. The Delete Community
popup menu displays (see Figure 9 on page 20).
4. Select the Delete Community command. A confirmation message displays.
5. Select OK or Cancel. The selected community is deleted from Community & Trap, but the setting
is not yet implemented in the subsystem.
6. Select Apply.SelectOK or Cancel on the confirmation message.
Figure 9 Delete Community Pop-Up Menu
Changing a Community Name
To change a community name:
1. Change to Modify mode (see HP StorageWorks XP12000/XP10000/SVS 200 Remote Web
Console User’s Guide if you need instructions).
2. Log on to Remote Web Console.ClickGo – Environmental Settings – SNMP Information in the
menu bar of Remote Web Console Main window. The SNMP Information window is displayed
(see Figure 4 on page 15).
20
Performing SNMP Operations