SVS 200 SNMP Agent Reference Guide (AE002-96035, October 2007)

Figure 6 Delete IP Address Pop-Up Menu

Adding a Com

munity Name

To add a community name:

1. Change to Modify mode.

2. Log on to Remote Web Console.ClickGo – Environmental Settings – SNMP Information in the

menu bar of Remote Web Console Main window. The SNMP Information window is displayed

(see Figu

re 4 on page 15).

3. In Community &Trap box, select and right-click Community. Add Community pop-up menu

displays (see Figure 7 on page 19).

Select Add Community. Community dialog box (see Figure 8 on page 20) displays.

5. In the Community text box, enter desired community name. You can use up to 180 alphanumeric

charact

ers, except for ", \, ;, :, ,, *, ?, <, >, |, /, ^, &,and%. You can also use spaces,

except at the beginning or the end of the name.

6. Select OK. The new community name displays in Community & Trap, but the changes are not

yet imp

lemented in the subsystem.

7. To add one or more IP addresses to the new community, see

“Adding Community IP Addresses” on page 21.

8. To appl

y changes, select Apply.SelectOK or Cancel.

Figure 7 Add Community Pop-Up Menu

XP12000/XP10000/SVS 200 SNMP Agent Reference Guide