SVS 200 SNMP Agent Reference Guide (AE002-96035, October 2007)

3UsingtheSNMPGUI

SNMP Information Tab

The SNMP Information tab allows you to extend the number of LUs and cache memory using Just in

Time Storage.ClickGo – Environmental Settings – SNMP Information in the menu bar of Remote Web

Console Main window. The SNMP Information tab displays. Select the SNMP Information tab (see

Figure 4 on page 15).

Note:

Option buttons (left side of the window) and subsystem information icons (window upper right

corner) have been omitted from the screen shot. See HP StorageWorks XP12000/XP10000/SVS 200

Remote Web Console User’s Guide for an illustration.

Figure 4 SNMP Information Tab

The SNMP Information tab has the following features:

• Install:TheExtension SNMP check box is selected if the SNMP Agent feature is enabled.

Note:

To set the SNMP Agent properties from HP StorageWorks XP Remote Web Console computer,

select Extension SNMP on SNMP Information window.

• Manager: The Manager section allows you to add an

d delete SNMP manager information (see

“Adding SNMP Manager IP Addresses” on page 17).

•TheIP Address list box: Displays the IP addresses of registered SNMP managers from which

the SNMP agent accepts requests. If no manager is registered, the SNMP agent accepts

requests from all managers. You can register up to 32 managers.

•TheIP Address text box: Enter the IP address tha

tyouwanttoregisterasanSNMPmanager.

The value of each number in the IP address must

be from 0 to 255 inclusive.

XP12000/XP10000/SVS 200 SNMP Agent Reference Guide