HP StorageWorks XP Remote Web Console User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1714-96031, June 2010)

Name column displays the Installed icon ( ). Please purchase the sufficient capacity before
the license key expires.
• Time Out: The term has already expired for the temporary key. The Product Name column
displays the Not Installed icon ( ).
• Reinstall Key: The option is not installed. The Product Name column displays the Not Installed
icon ( ).
• Expired: The license key of the option that has been in the Capacity Insufficient status has ex-
pired. The Product Name column displays the Not Installed icon ( ).
• The Available Install column shows the option that can be installed using the Available button of
Mode in License Install. The row of the option that can be installed using the Available button
shows Enable. For detailed information on installing the option using the Available button, see
“Enabling Available XP Remote Web Console Options Automatically” on page 62.
Table 9 Calculating Volume Capacity
Formula for Calculating Volume CapacityVolume Emulation Type
712 KB × (number of user cylinders)3380-x, OPEN-x
848 KB × (number of user cylinders)3390-x
Table 10 Sample Estimation of Needed Capacity
ValueItem
3390-3Volume emulation type
3,339Number of user cylinders
2,048Number of volumes
870 KB × 3,339 × 2,048 = 5,949,296,640 kB
5,949,296,640 KB ÷ 1,024 = 5,809,860 MB
5,809,860 MB÷ 1,024 = 5,673.70 GB
5,673.70 GB ÷ 1,024 = 5.54 TB
Total volume capacity
At least 6 TBEstimated needed capacity
The Total Storage graphic is on the lower left corner of the License Key tab; it displays the total volume
capacity currently available in the array (see Figure 34).
Installation Requirements and Procedures54