HP StorageWorks XP Remote Web Console User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1714-96031, June 2010)

NOTE:

For open system volumes, the arrays support a maximum of only 16,384 LDEVs. This means that

CU group 0

is the only available CU group for open system volumes.

NOTE:

The CU number

is reserved for RAID Manager operations. Therefore, the CU number that can

be used for XP Remote Web Console operations is up to

. This means that 16,128 LDEVs belong

to CU group 3.

Table 2 CU Numbers and LDEV Numbers for Each CU Group (Mainframe Only)

Range of LDEV Numbers

for each CU Group

Range of CU Numbers

for each CU Group

Term Displayed on the XP

Remote Web Console main

pane

CU Group

00:00 - 3F:FF00 - 3FCU00 - 3FCU group 0

40:00 - 7F:FF40 - 7FCU40 - 7FCU group 1

80:00 - BF:FF80 - BFCU80 - BFCU group 2

C0:00 - FE:FFC0 - FECUC0 - FECU group 3

At the beginning of XP Remote Web Console operations, you need to select a CU group (see Figure

46). After you have selected a CU group, you can only perform operations on the LDEVs for the

selected CU group. You are not allowed to perform operations across multiple CU groups.

Operations for some of the XP Remote Web Console product options can be performed for all CU

groups, however, the operation of other product options is limited to CU group 0. All CU groups are

available for the following product options:

• XP LUN Configuration and Security Manager Software

• XP Auto LUN Software

• XP Cache LUN Software

• Hitachi Parallel Access Volumes (HPAV)

• XP Disk/Cache Partition Software

Software Product Matrix

Table 3 provides a description of many of the XP software products (also referred to in this user guide

as product options) available through XP Remote Web Console.

Table 3 Software Product Matrix

Prerequisites/Requirements/IntegrationDescriptionSoftware

Product

High availability and data replication software

XP Remote Web Console User Guide 17