HP StorageWorks XP Remote Web Console User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1714-96031, June 2010)

Available ValuesItemColumn
One of the following can be set:
High Speed mode (2 ports):
Standard: Standard mode (all ports)
HighSpeed: High Speed mode (all ports)
HighSpeed (Block-A): The upper four ports of the CHA are the High Speed
mode.
HighSpeed (Block-B): The lower four ports of the CHA are the High Speed
mode.
High Speed mode (32 ports):
Standard: Standard mode (all ports)
HighSpeed: High Speed mode (all ports)
HighSpeed (Block-ABCD): Define four blocks as A, B, C, D, and write only for
the High Speed mode in the order of A, B, C, D.
For example, when A is High Speed mode, you will write:
HighSpeed (Block-A)
Another example, when A, B, and D are High Speed mode, you will write:
HighSpeed (Block-ABD)
PCB Mode2nd, 12th
Blank
3rd-6th,
13th-16th
Port Settings
The [Port] tag allows you to set the port information and the change the security switch (Secure Manager
XP) to ON or OFF. You can change the [Port] tag definitions, but may not add or delete them.
You cannot change the NAS settings using the spreadsheet. However, the current NAS settings are
commented on the exported spreadsheet (the rows start with “#$”).
CAUTION:
Do not change the NAS comment rows.
XP Remote Web Console User Guide 153