HP StorageWorks XP Remote Web Console User Guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (T1714-96031, June 2010)

RequirementsItem
Host group ID, host mode, LUN, CU, and LDEV parameters should
be written in one or two-digit hexadecimal numbers.
LUN parameters can be written in up to four-digit hexadecimal
numbers.
Tab codes and a series of spaces before or after a comma are
ignored.
Format (for more information on the
required format, “LUN Manager
Spreadsheet Settings” on page 150)
Spreadsheet Components
The spreadsheet consists of the following components:
• Spreadsheet Declaration (see “Spreadsheet Declaration” on page 147)
• Function tags (see “Function Tags” on page 148)
• Configuration definition(s) (see “Configuration Definitions” on page 149)
• Comments (see “Comments” on page 150)
Spreadsheet Declaration
The spreadsheet declaration is required, and is written at the beginning of the spreadsheet. Certain
parts of the declaration will have already been written in the exported current spreadsheet. If the
declaration line is incorrect, an error occurs and the spreadsheet file will be rejected.
NOTE:
The spreadsheet declaration line is not case-sensitive.
• Format (variables are shown in italics):
#!Version,Version number,Program Product,Process mode
• Example:
#!Version 04_00_00,LUN,Change
Table 17 describes the spreadsheet declaration components.
Table 17 Spreadsheet Declaration Components
DescriptionComponent
Indicates the declaration line. Cannot be changed.#!
Indicates that the Remote Method Invocation (RMI) version number follows.
Cannot be changed.
Version
Required between the version and the version number.
(One byte space)
RMI version number.Version number
Follows the RMI version number, (comma with no spaces)
Indicates the required product. LUN indicates LUN Manager.Product
Follows the program product, (comma with no spaces)
XP Remote Web Console User Guide 147